Yocan Evolve-C Manual

Moderator: Yocan

Post Reply
Yocan
Posts: 869
Joined: Wed Dec 05, 2018 2:10 am
Contact:

Yocan Evolve-C Manual

Post by Yocan » Thu Mar 11, 2021 3:52 am

Preparing the Yocan Evolve-C Vaporizer
  1. Make sure that you charge the Yocan Evolve-C Vaporizer before use.
  2. Once you have secured a full charge, turn on the vaporizer battery by clicking the power button 5 times. Note: The power button is located at the middle part of the battery facing outwards just above the Evolve logo.
Loading the Yocan Evolve-C Vaporizer Concentrate Atomizer
  1. Place your concentrates on a parchment paper, on a jar, or any container where you can easily pick or scoop up your waxy concentrates upon loading.
  2. Unscrew the metallic cover to access the concentrate atomizer inside.
  3. Once the metallic cover has been removed, hold the wax concentrate chamber and twist it counterclockwise to remove it. This will detach the atomizer chamber from the battery itself and will allow you to safely load the wax concentrate atomizer.
  4. Unscrew the bottom part of the concentrate atomizer chamber to reveal the atomizer coil.
  5. Load your desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop atomizer coil.
  6. Reconnect the bottom part by screwing it back. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
    Reconnect the concentrate atomizer to the battery by marrying the 510-threaded connections and tightening it by turning it clockwise.
Loading the Yocan Evolve-C Vaporizer E-Liquid Atomizer
  1. Set your e-liquids aside where you can easily take them or get them up when loading.
  2. Unscrew the metallic cover to access the concentrate atomizer inside.
  3. Once the metallic cover has been removed, hold the e-liquid chamber and twist it counterclockwise to remove it. This will detach the atomizer chamber from the battery itself and will allow you to safely load the e-liquid atomizer.
  4. Unscrew the lid of the e-liquid atomizer chamber to access the filling hole.
  5. Load your desired amount of e-liquid onto the coil. Note: Make sure not to overfill the e-liquid atomizer chamber as it may result to spillage.
  6. Reconnect the lid by screwing it back. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
  7. Reconnect the e-liquid atomizer to the battery by marrying the 510-threaded connections and tightening it by turning it clockwise.
Vaping with the Yocan Evolve-C Vaporizer
  1. Make sure that the Yocan Evolve-C Vaporizer is charged, and is loaded with the correct type of concentrate or e-liquid before vaping.
  2. Once loaded, take the mouthpiece and press your lips against it and prepare to draw.
  3. Press and hold the power button at the same time and as the Yocan Evolve-C Vaporizer begins producing vapors, inhale and pull from the vaporizer.
  4. Repeat this process as necessary or as the concentrates or the e-liquids are fully consumed.
Care and Maintenance of the Yocan Evolve-C Vaporizer
  1. The Yocan Evolve-C Vaporizer are made to have only few parts. This costruction makes it a solid device and is likewise easy to maintain and clean. To clean your Yocan Evolve-C Vaporizer, follow the steps below.
  2. Disconnect the wax concentrate atomizer chamber and the e-juice chamber from the battery.
  3. Check for damages and decide whether to replace the broken atomizer parts.
  4. Wipe off the vaporizer and the parts with a dry paper towel.


Any time, any place, happy vaping with UNI Pro.

Post Reply

Return to “Yocan Tech”