How to fix Yocan UNI Pro no atomizer error?

Moderator: amy2019

Post Reply
amy2019
Posts: 39
Joined: Sun Jul 28, 2019 6:40 pm
Contact:

How to fix Yocan UNI Pro no atomizer error?

Post by amy2019 » Mon Oct 19, 2020 8:28 pm

Yocan UNI Pro display seems to be reading a connection issue.

If your Yocan UNI Pro is experiencing a connection issue, the OLED display will give you 'no atomizer' error. This post we are going to discuss how to ix Yocan UNI Pro connection error?

First of all remove the 510 thread adapter and the oil cartridge from UNI Pro battery.

Hit the fire button without cartridge, the UNI pro battery should be displayed no atomizer error.

And please use a q-tip with Isopropyl Alcohol clean the contact points.

Re-install cartridge and adapter, if the battery still display no atomizer, try to install a brand new cartridge.




If these conditions are met and you are still experiencing connection issues, please contact Yocan Customer Service

And here are some suggestions from Yocan users.
How do I fix no atomizer on UNI pro?
Recap
Clean all contacts on battery/mod, tank or pod.
Remove and reinstall the coil (after cleaning)
Try a new coil.
Check the 510 pin and see if you can adjust it (mods/tanks)
Try another tank on your mod.
Try another mod with your tank.
Adjust base of coil carefully if you can (mainly sub-Ohm coils)



Related topic:
How to Fix Check Atomizer/No Atomizer On A Pod Vape
Clean Your Contact Points. The first step you should try if your pod vape isn't firing or says check atomizer is cleaning out your contact points.
Check Your Contact Points for Damage.
Reseat your Coil/Pod.
Try Another Coil/Pod.



Related post about Yocan vaporizer:



Hitoki Laser Vape Use
Post Reply

Return to “Vape.Lab”