If your Yocan device has restricted airflow, try to follow below vape tricks to clean and declog it.
unscrew all parts
First of all, unscrew all parts, seperate the following Yocan Evolve Plus XL components:
what you’d want to do is to remove and separate the coil from the battery, in this case, you have to twist the threaded connections to take off the coil from the vaporizer itself.
Soak in ISO, And Wipe It
Exluding the Silicone Jar, and the Evolve Plus Xl battery, soak the above parts in Isopropyl Alcohol for at least one hour.
Then remove and wipe down all surfaces with cotton swabs.
Step 1 – Place the parts in a Sealable Plastic Bag with Alcohol.
Step 2 – Add a Teaspoon of Salt.
Step 3 – Let the parts Soak.
Step 4 – Shake the Bag.
Step 5 – Remove the part from the Bag and Wash.
Step 6 – Let the parts Dry Completely
By the way, if you want to clean the Evolve Plus Xl battery 510 thread or the silicone jar, please use a cotton swab with Isopropyl Alcohol to clean off any reclaim in those parts. Then wipe down and dry completely before you use it.
Once you’ve secured the atomizer and the coil you’d want to do a bit of wiping especially around the threaded area and around the atomizer.
Burn Off Residual ISO
Fully assemble parts and engage device at full activation on MAX temperature level to burn off any residual ISO on remaining parts.
Common areas for clogging can be found in the Yocan Evolve Plus XL mouthpiece, QUAD coil cap, and the airflow part.
To minimize clogging in these areas, be sure to limit your loads to smaller concentrate material sizes, no larger than a couple grains of rice.
Regular cleaning and maintenance is recommended to avoid clogging and extend the life of your Yocan device.
Any questions, please comment below.