1. Check the battery charge.
Make sure that the battery is fully charged. You can do this by plugging the battery into a charger and checking the LED indicator. If the LED is red, the battery is charging. If the LED is green, the battery is fully charged.
2. Clean the battery contacts.
Use a cotton swab dipped in rubbing alcohol to clean the battery contacts and the cartridge connector. This will help to remove any dirt or debris that may be preventing the battery from making a good connection with the cartridge.
3. Try a different cartridge.
If you have another cartridge that you know works, try using it on your Lookah Bear battery. This will help to determine if the problem is with the battery or the cartridge.
4. Reset the battery.
To reset the battery, press the power button 5 times, and restart it by 5 clicks again. This will clear any temporary glitches that may be preventing the battery from working properly.
5. Contact Lookah customer support.
If you have tried all of the above troubleshooting steps and your Lookah Bear battery is still not working, you may need to contact Lookah customer support for assistance.
Here are some additional tips that may help to prevent your Lookah Bear battery from not working:
- Avoid dropping or bumping the battery.
- Store the battery in a cool, dry place.
- Do not expose the battery to extreme temperatures.
- Do not overcharge the battery.
- Use the correct charger for your battery.